How to install and maintain your garden fountain

Elegance and tranquility, the garden fountain immediately brings a much more zen atmosphere to the garden. It offers a touch of freshness and charm to the exterior, making it more harmonious. To fully benefit from the magic of moving water, we reveal our tips for installing it correctly in your garden and maintaining it properly.

Where to install a garden fountain?

To begin with, it is important to choose the garden fountain model that will best suit your exterior. Take the time to consider a fountain that appeals to you aesthetically. A fountain that will be harmonious with your living environment. There are a multitude of styles to suit everyone’s tastes. Vertical or horizontal fountain, in stone, in polyresin, with stream or waterfalls, you will inevitably find the one that will meet your expectations. It should be neither too small nor too large.

To define its location, some simple rules are recommended. To benefit from its beauty and soothing benefits, first choose a place where it will be highlighted. Prefer a semi-shaded space. Too much sun risks the evaporation of the water, while an area that is too shaded risks the proliferation of algae. Watch out for the trees! Prefer to move away from it to avoid the accumulation of dead leaves.

In any case, make sure you install the outdoor fountain on flat and stable ground. A stable surface guarantees correct functioning. You can lay a concrete base or pour a level layer of compacted sand. Finally, if your fountain requires electrical power, consider keeping it near a power outlet so you can plug in the pump.

In addition to its strong decorative and relaxing power, it helps to cool the temperature in the garden. To find out more, discover our article: How to cool off in the garden during a heat wave?

What water should I use to fill an outdoor fountain?

The choice of water for a garden fountain is essential to guarantee its correct functioning, avoid limescale deposits and prevent the proliferation of bacteria. There are several choices available:

• Tap water. This is the simplest and most accessible solution. But we don’t recommend it if you have hardness or limescale problems in your area.
• Demineralised water. It is perfect for preventing the formation of limescale and preventing scaling problems in the garden fountain. Demineralized water seems like the best solution. However, be careful to check its quality, take care to choose it carefully.
• Osmosis water. This is the perfect water for the healthiest water possible. Prevents the proliferation of bacteria by eliminating impurities, viruses, bacteria, pesticides and heavy metals. Reverse osmosis water means you spend much less on garden fountain maintenance.

You have installed and filled your garden fountain. Now you can enjoy its sweet dripping. To ensure optimal durability, we remind you that it is strongly recommended to regularly add fresh water and check the level. The surface of the water must be a few centimeters, about 2 or 3, below the edge of the pool. A good water level allows the fountain to work properly and the pump to not suffer damage.

How to clean a garden fountain?

Maintenance is a step that should not be overlooked to keep the garden fountain always beautiful and functioning. First, simply use a soft brush, white vinegar or a special outdoor fountain cleaner to remove all limescale deposits, algae and other accumulated dirt. Remember to clean the pump and filters, following the manufacturer’s recommendations. This action is necessary for the outdoor fountain to maintain its performance.

Finally, if you want to reduce the frequency of maintenance, you can use water treatment to clean the water more thoroughly. A treatment specifically designed for fountains prevents the growth of bacteria and mold, reduces the formation of limescale, a real time saver and lower water consumption!